5 min read
A cold room checklist for cafés, delis and guesthouse kitchens
The six checks that prevent most cold room failures, and how often they should happen.
Most cold room failures we attend were visible before they became urgent: a door seal that stopped seating, a drain that started to freeze, a defrost cycle that drifted, a condenser matted with kitchen lint. A short checklist, done properly, finds those things while the kitchen is quiet.
Weekly: the things staff can see
Check the displayed temperature against a separate reading, look for ice on the ceiling or floor, and listen for the evaporator fan. Wipe the door seal and check that the door closes on its own. None of this needs tools, and each item catches a fault early.
Record the readings. A slow upward drift across a week is far easier to diagnose than a single alarm on a Saturday morning.
Quarterly: the things a technician should check
Condenser and evaporator condition, refrigerant pressures, defrost termination, drain heating, door heater function and panel joints. In a coastal suburb the condenser cleaning interval is set by the site, not by a generic calendar.
Ask for the findings in writing. A cold room that is 'working' can still be running far outside its design parameters, and the electricity bill usually notices first.
Before a busy season
Bring the service forward rather than waiting for the first hot week. Seals, heaters and drains that survived a quiet winter are the parts that fail when the door starts opening every few minutes.
If the room is close to capacity, that is also the moment to discuss whether a second room or a larger one is the better answer, rather than pushing the existing plant harder.
In short
Weekly eyes and a quarterly technical visit prevent most cold room emergencies. Keep the readings; they are the cheapest diagnostic tool you have.